Sunday, April 10, 2011

Purple Reign

So after a week of silence, I bet you thought I was already off the blogwagon, didn't you? You also probably thought I'd not done anything further with the shop.

Both not true.

Progress Report:
1. I've finished hanging the lights. They are bright! Yeah! They're wired so I can have overhead light just over the area where the workbench will be or I can have light over the rest of the room or I can have both (or none, I suppose...). Also have can lights against the back wall where I plan on installing a bank of base cabinets. I have plenty of outlets along the walls, so I can use portable lights for when I need to create a raking effect.
2. I've narrowed down flooring selection. Hopefully this week I'll be able to view samples of the three or four I'm going to choose from and will be able to put in the order. Would like to get the flooring ordered this week so I can get it into the room to acclimate for a few days prior to install. We'll be pushing this part to the wire. In the mean time...
3. *sigh* The walls. Ugh, I hate purple. So far, the exercise room purple walls, painted by the previous home owner, have defeated me. After three (3) coats of KILZ, I can still see a hint of it coming through. Is it because they painted virgin concrete? Is it purple paint coloring from Hell? Why can't I get it covered up? I'm going to let my third (3rd) coat dry for more than 24 hours and then I'll go down again and see what it looks like. Maybe I'll paint a test area with the semi-gloss top coat to see if it is giving me good coverage.

Wish me luck. And toss any advice my way you might have on painting purple walls.

Oh, and I had an interesting idea for the box commission I recently received. I'll toss some photos/descriptions at the person requesting the box to see what he thinks. If he likes it, I'll start working on dimensions and details. Don't worry; I'll probably let you know what I'm going to do.

Friday, April 1, 2011

Shop Flooring - Light Or Dark?

This whole idea of setting smaller goals seems to be working! In the last week, I've installed my can lights, painted the ceiling (two coats, semi-gloss), replaced a few outlets that needed replacing, put all outlet and light switch covers back on, and installed two of five florescent lights (I'm currently using 5000 Kelvin color temperature bulbs for a natural daylight effect; it seems a little harsh, so I might change a few bulbs out with a lower color temperature to warm it up a little). I'll try to get some pictures up this weekend.

In order to complete my current goal list, I need to finish the lighting, paint the walls, and get the flooring down before May 1st.

Thinking ahead, I'll need to get flooring ordered within the week so I can let it acclimate to the basement before I install it. A life-long friend of mine, Ken, owns a carpet and tile store and is going to help me out with the flooring. I think he's partly interested in helping me because I'm going with a new product and he wants to see what it looks like when it is done. I might even be able to talk him into helping me install it for some beer and pizza... (good beer, of course).

Continuing a theme of an eco-friendly (and not echo-friendly, which would just get irritating after a while) workshop, which will be the subject of another post, I think I'm going to give cork flooring a try. He carries a new product of cork flooring that is Greenguard Certified and comes in 4" wide planks, like a hardwood floor might. That should make installation easier (I can crosscut with my power miter saw in the basement instead of on the table saw in the garage). And it should be a tool-friendly floor when the inevitable chisel rolls off the workbench.

So now here comes my question for you, the general woodworking community. Should I use lighter cork flooring, like the image on the left or darker cork flooring, like the image on the right, in a workshop?



I'm trying to consider more than just, "a dark wood floor will always look dirty", which is exactly the problem I have with my 1100 square feet of Santos Mahogany flooring on the main level (which happens to show drywall dust cat prints really well). It's a workshop; it will be dusty. That doesn't bother me. But I do want something that is inviting and pleasing to the eye, in addition to being comfortable to walk and work on.

Things to consider when responding:
  • The ceiling is semi-gloss off-white paint.
  • The walls will be semi-gloss off-white paint.
  • I plan on setting up a totally movable tool storage system involving a permanent French cleat around the entire shop with smaller 2'x4' storage boards I can move around as needed, so the white walls will hopefully be broken up quite a bit.
So please, give me your opinion. Is the floor in your workshop darker or lighter? What do you like/not like about that aspect of your floor? Would you put your flooring down again?

(And no, this isn't some shameless technique for getting people to comment on my blog. It is a
very shameful technique... but I also want to hear what you have to say.)